Gemeinsam mit unserem Finanzierungspartner TARGOBANK ermöglichen wir dir eine bequeme Finanzierung in monatlichen Raten – für Warenkörbe ab 99,00 €.
| Laufzeit | Effektiver Jahreszins |
|---|---|
| 6–12 Monate | 5,90 % |
| 15–21 Monate | 6,90 % |
| 24–30 Monate | 7,90 % |
| 33–36 Monate | 8,90 % |
Nur innerhalb Deutschlands verfügbar. Finanzierung ab 99,00 € Warenkorbwert und vorbehaltlich der Prüfung durch die TARGOBANK.
Wähle an der Kasse einfach die Zahlungsart TARGOBANK Finanzierung und folge den weiteren Schritten. Nach Abschluss deiner Bestellung gelangst du zum Finanzierungsantrag der TARGOBANK.
Die Finanzierung erfolgt vorbehaltlich der Prüfung und Genehmigung durch die TARGOBANK. Die Angaben sind unverbindlich; maßgeblich sind die Konditionen im individuellen Finanzierungsangebot. Eine monatliche Mindestrate kann gelten.
Piece
This top-quality ATX® Rack Cable Station incl. Multi-Press for Wall Mounting allows you to perform almost all important basic strength training exercises – from pull-ups, squats, bench presses, and overhead presses – either freely on the barbell rack or on the linearly guided multi-press!
The double-sided cable pulleys allow all relevant pulling exercises from above and below and are equipped with first-class ATX®-XT arms (swiveling extension arms), which enable close and wide pulling exercises (e.g., cable cross-overs).
Very stable construction made of thick-walled square steel tubing (60 x 60 x 3 mm) - loadable up to 400 kg. Sliding bushings in the weight stacks and ball-bearing cable pulleys ensure silky-smooth operation.
+ Wall cable station with 2 x 90 kg weight stacks
+ with swiveling extension arms
+ incl. multi-press with linear ball bearing guide
+ incl. J-Hooks + Safety Spotter-Arms
+ incl. pull-up bar
+ incl. accessories: 1 x triceps rope, 1 x foot strap, 2 x single handles
+ expandable with many other options
1 x ATX® ATX® Rack Cable Station with 2 x 90 kg Weight Stacks incl. Multi-Press - for Wall Mounting
Item Number: MS-ATX-WSR-640
Including accessories:
The accessories shown, such as weight plates, barbell, resistance bands, flooring, etc., are not included in the scope of delivery.
The attachment points of the ATX® Rack Pull Station do not have 1-inch holes. The uprights feature holes with a diameter of 21 mm in a 50 mm hole spacing.
Accessories for racks with 1-inch or 25.4 mm bolts are therefore not readily compatible. Only attachment parts that are explicitly approved for the 21 mm hole and the respective ATX® Rack model should be used.
The distance between the wall and the Smith bar on the ATX® Rack Pull-up Station for wall mounting is approximately 67.5 cm.
No, an adapter sleeve to use 30mm weight plates on a 50mm shaft is technically not possible, since the bore of the 30mm plates is smaller than the existing shaft.
For ATX® multi-presses with a fixed 50mm shaft, weight plates with a 50/51mm bore must be used.
The delivery of the ATX® Rack Cable Station incl. Multi-Press for wall mounting (MS-ATX-WSR-640) includes the complete station with 2 × 90 kg stack weights, the swiveling XT extension arms, the multi-press including guided barbell, the pull-up bar, and the mounting bracket for wall installation. Also included are:
J-Hooks and Safety Spotter Arms for free weight training
3 carabiners
1 tricep rope
1 foot strap with velcro fastener
2 ATX® single-hand grips with aluminum handles
For an equipment setup as shown in the application images, you will additionally need a weight bench, a separate barbell for the J-Hooks and matching weight plates. The multi-press is loaded with plates featuring 50/51 mm bore holes. Additional cable handles or cable bars, resistance bands and the pictured floor mat are also available separately. For cable training, the weight stacks and the aforementioned handles are already included.
Delivery is unassembled including assembly instructions. Wall anchors for installation are not included and must be selected to match your wall type.
The ATX® Rack Cable Station including Multi-Press for wall mounting has a base depth of 88 cm from the wall to the front edge of the rack uprights. With the Safety Spotter Arms extending forward, the total depth is 140 cm. The safety shelves thus extend an additional 52 cm into the room.
For use, you should plan for adequate movement space in front of the station – especially for a weight bench and cable exercises. The 140 cm describes the pure equipment depth, not the total space requirement during training.
For a wall-mounted rack with integrated multi-press, we recommend our Floor Protection Mat Excellence 1000x1000 mm, available in both 15 mm and 20 mm thickness. Both variants are made of high-density rubber granulate and offer a robust, slip-resistant training surface with sound and vibration dampening properties.
Which thickness is right for your use case?
15 mm thickness: Generally completely sufficient for a rack with multi-press in normal strength training. The mat protects the floor from pressure marks and scratches and provides good dampening while maintaining high form stability.
20 mm thickness: Recommended if you regularly train with heavy free weights in addition, or if you place particular value on higher impact and sound dampening. The additional material thickness provides more protective reserves under heavier loads.
Our recommendation: If you use the rack primarily for guided strength training on the multi-press and classic rack exercises without dropping heavy dumbbells, the Floor Protection Mat Excellence in 15 mm thickness is an excellent choice. The 20 mm variant is particularly worthwhile for more intensive free weight training.
When wall-mounting, bear in mind that the floor protection mats will change the installation height of the rack. The wall mounting must therefore be aligned accordingly and installed according to the manufacturer's mounting instructions on a sufficiently load-bearing surface.
Please also note that for regular dropping of heavy barbells, a special drop platform or additional Anti-shock Drop Plate is recommended.
The multi-press has weight plate attachments with a diameter of 50 mm as standard. Therefore, weight plates with a 30 mm bore unfortunately cannot be used.
An appropriate adapter is not technically possible, since the attachment for 30 mm weight plates is smaller than the diameter of the multi-press attachments.
To use the multi-press, you will therefore need weight plates with a 50/51 mm bore.
Yes, with the ATX® Rack Pull Station you can perform guided squats with additional weight.
The integrated Multipresse features a high-quality linear ball bearing guide that enables smooth and controlled movement along the guide rails.
Training resistance can be individually increased by placing additional weight plates with 50 mm collar on top.
For added safety, the Multipresse is equipped with adjustable safety catches that limit the downward range of motion.
Alternatively, using the included J-Hooks and Safety Spotter Arms, you can also perform free squats with a separate barbell.
The ATX® Rack Pull Station is therefore suitable for both guided and free barbell training.
Du bist unsicher, welches Produkt zu deinem Trainingsziel passt? Kein Problem! Unser erfahrenes Team nimmt sich Zeit für dich – telefonisch (08142/ 448666), per E-Mail oder direkt im Showroom. Gemeinsam finden wir die optimale Lösung für dein Vorhaben.
